新闻  |   论坛  |   博客  |   在线研讨会
ZCC575A数字温度传感器-替代LM75
15995147496 | 2022-05-16 16:51:14    阅读:71   发布文章

Features  

Temperature accuracy ±1℃ from -20℃~ 80℃ ±2℃ from -40℃~ 125℃ Low power consumption 4.5uA shutdown current at VDD=5.0V 125uA continuous conversion current 2.2~8.0V ultra-wide operation supply voltage High PSR in temperature monitoring I2C &SMBus digital communication interface LM75 function and register compatible 0.0625℃ temperature resolution Support up to 32 devices by A0/A1/A2 pin  hardware configuration OS pin open-drain alert and interrupt  multi-function OS output polarity configuration Embedded one-shot conversion mode

Applications

Home appliance thermal control Server board temperature monitoring Thermostat control Environmental temperature monitoring Electronic equipment and facilities General system thermal management Description

The ZCC575 is a digital-type high-accurate on-chip  integrated temperature sensor chip with an  integrated high resolution sigma-delta converter and  I2C/SMBus digital interface. It is register and function  compatible with industrial standard LM75 digital  temperature sensor. ZCC575 is available in E-MSOP8  package, it offers hardware pin and firmware  compatibility to easy upgrade from LM75x design. Digital communication 2-wire interface which  operates up to 400KHz of fast mode and 2.5MHz of  high-speed mode. There are 3 hardware address pins,  A0/A1/A2, which could configure the I2C address  externally. The ZCC575 has a dedicated  over-temperature shutdown output (OS) pin with  programmable higher or lower limit in hysteresis.  The OS pin could also be output polarity reverse by  configure POL register bit setting in configuration  register. There is a consecutive fault measurements  function which could be programmed by  1/2/3/4counts. The OS pin will enabled if the  temperature conversion data is over the pre-set  limitation value continuously, and satisfies the FQ[1:0]  resister setting

*博客内容为网友个人发布,仅代表博主个人观点,如有侵权请联系工作人员删除。

参与讨论
登录后参与讨论
推荐文章
最近访客
站长统计